Service
Compression Moulding
0102030405
Round Silicone Car Coaster Water Bottle Anti-slip Mat
Product introduction
Lathe processing and milling machine processing have their own advantages and disadvantages, some workpiece both need lathe processing, but also need milling machine processing, these two kinds of processing if can be completed on the same machine tool is the best, so the birth of turning milling composite processing, turning milling composite processing reduces the number of clamping, improve efficiency. Reduce the error of clamping, improve the processing quality, this process has been slowly popularized, with the improvement of people's living standards, the product quality requirements are getting higher and higher, the old production process is slowly eliminated, turning and milling composite process is more and more widely used.
Production technology
Milling machine processing technology, milling machine processing workpiece fixed, tool rotation of a processing method, suitable for processing holes and steps and other special shapes, processing of cylindrical accuracy is not high lathe, milling machine processing technology is very widely used, with the continuous development of CNC processing technology, ordinary milling machine has been slowly replaced by CNC milling machine, but also by the initial three-axis processing, four-axis processing, milling machine, milling machine, milling machine. To five-axis machining.
Product design
According to the processing allowance is divided into rough machining, semi-finishing and finishing, rough machining allowance is more, the speed is low, the cutting amount is large, the surface is relatively rough, usually leave about a millimeter, the margin for semi-finishing and finishing, rough machining due to the shape of the workpiece and the tool, the surface allowance is not uniform, at this time you need semi-finishing to remove the excess allowance, the speed is higher than rough machining, The cutting depth is less than the rough machining, and finally the finishing, the machine speed is high, the use of better, relatively new tools, less cutting, high surface accuracy, direct processing to the number. Different processing technology uses different tools, different cutting parameters.
There are many changes here, and the technical content is high. Products need to be clamped in
the process of processing, some products can be fixed with ordinary fixtures, some products to design special fixtures to fix, and sometimes need to customize fixtures.
